1.Distance between needles can be customized（0.5 or 1 inch）.
2.The fabric is kept away from dirt because the double rocker arms without cams are introduced to the needle bar and plate.
3.Main shaft is controlled by frequency conversion system and the automatic needle lifting frame adopts servo device.
4.The speed can be controlled by computer and can reach 1000 rpm.
5.The distance between needles can be set in the range of 3-8mm.
6.Can be set to stop working automatically when the quilting is finished.
7.Both serial patterns and Tack & Jump patterns (360° and 180°） are available. The machine can automatically check its working condition and the stronger machine body makes it run more stably.
|Needle bar distance|| |
50.8, 76.2, 127mm (5’’)
76.2, 76.2, 152.4mm (6’’)
|X-axis movement displacement||304.8mm|
|Quilting thickness||≤80mm||Needle distance||≤80mm|
|Needle distance||25.4mm||Stitch length||3-8mm|
|Capacity||60-300(m/hour)||Needle type||24/180 23/160 22/140 21/130|
|Main shaft speed||500-1000rpm||Voltage||380v/50hz 220v/60hz, 3-phase|
Automatic stop when up or bottom thread is broken, and both up and down safety infrared protection.
Delta VFD (variable-frequency driver) drives main shaft (Z shaft), Panasonic servo driver & motor control the saddle (X shaft) and roller (Y shaft).
Both serial patterns and Tack & Jump patterns (360°and 180°) are available.
Controlling system based on Windows, CAD drawing.
Automatic stop when pre-set processing length is finished, which is saving labor and easy operation.
Automatic detection of machine running condition.
Stronger machine body makes it run more silently and stably.