1. What should you pay attention to when using materials for KB6A Multifunction Flanging Machine?
Answer:
A. When using different materials or fabrics, it is necessary to debug the synchronization of machine feeding.
B.When sewing thick materials over 8cm, operators with sewing machine skills are required to sew corners.
2.Does KB6A Multifunction Flanging Machine have any other advantages besides thickness and speed?
Answer:
Raising the presser foot to 35MM makes it easier to feed materials when sewing thick fabrics.
3. With KB4A/KB6A Multifunction Flanging Machine, do you need to change the pressure of the presser foot when sewing very thin or very thick things? Do we need to change the air pressure on presser foot while sewing very thin or very thick stuff?
Answer:
The thickness of KB6A fabrics is different, so the air pressure needs to be changed. The fabric materials are different, so the machine feeding synchronization needs to be debugged! KB4A basically does not require debugging!
4.What are overlock width ranges of KB1A, KB4A, KB6A (size after overlocking is completed)? Can we have KB4A Multifunction Flanging Machine with needle to needle gap of only 15 mm?
Answer:
KB1A Multifunction Flanging Machine can be 15mm or 20mm or 30mm (you can only choose one).
KB4A Multifunction Flanging Machine can be 15mm or 25mm or 30mm (you can only choose one).
KB6A Multifunction Flanging Machine only has 25mm.