Take out the head of the machine from the packaging box. Screw 3 φ10 screws on the top position of the moving box and adjust the belt according to the routine that the head drives the belt.(the distance between the back side of the head’s bottom panel and lift-and-drop panel should be 95mm)

The reasons and remedies for thread skipping

The electronic control cabinet is installed at the bottom of the worktable, the electric contrinet is installed in front of the worktable, and the wire is drawn from the right lower right of the electronic control cabinet to supply the wire to connect the 380v voltage.

Open the power switch，the power is supplied on the three phase four wire system AC380/220 V power. After the screen shows control interface，click Change Pattern，and click Zero， the machine will emits a buzzing sound，and the saddletree move to zero position automatically. Press the start button to wo